What filter series does Omega Air supply elements for in India?

Omega Air supplies replacement filter elements for their full filter range: AAF series (screwed BSP, up to 16 bar, 10–2,760 Nm³/h), BF series (flanged DN80–DN300, up to 16 bar, 1,680–31,400 Nm³/h), HF series (screwed BSP, up to 50 bar, 71–2,760 Nm³/h), CHP series (screwed BSP, 100–420 bar, 40–715 Nm³/h), P-VAC (vacuum, 1.25–345 Nm³/h) and M-VAC (medical vacuum). Nitrogenium supplies genuine Omega Air elements for all these series from Delhi stock.

What element grades are available for Omega Air filters?

Omega Air filter elements are available in five grades: P (3 µm particulate — general bulk filtration), R (1 µm fine particulate), M (0.1 µm coalescing — removes oil mist and water aerosols, ISO 8573-1 Class 2), S (0.01 µm high-efficiency coalescing — ISO Class 1, used for food, pharma and electronics), and ACS (activated carbon — removes oil vapour, hydrocarbons and odours). The correct grade depends on your downstream air quality requirement.

How often should Omega Air filter elements be replaced?

Omega Air recommends replacing filter elements every 12 months or 4,000 operating hours, whichever comes first. Activated carbon (ACS) elements should be replaced every 6 months due to saturation of the carbon bed. In Indian industrial environments with high ambient dust and humidity, coalescing elements (M and S grades) may need replacement at 8–10 months.

Are Omega Air elements compatible with Parker Domnick Hunter housings?

Yes — Omega Air manufactures ODHE series elements that are direct cross-references for Parker Domnick Hunter Oil-X Evolution housings. These are NOT generic copies — they are engineered and tested to Parker housing dimensions and rated to the same ISO 8573-1 class as the OEM element. Ask us for the specific ODHE cross-reference for your Parker part number.

Can I buy Omega Air filter elements in bulk for annual maintenance?

Yes — Nitrogenium offers annual maintenance supply contracts and volume pricing for bulk element orders. We work with maintenance managers, procurement teams, and AMC contractors across India. For plants with multiple filter housings, we can prepare a consolidated element BOM, confirm stock, and dispatch in a single shipment. WhatsApp us at +91-9810070303 with your requirements.

What is the price of Omega Air filter elements in India?

Pricing depends on the filter series (AAF/BF/HF/CHP), element grade (P/R/M/S/ACS), and size. As the authorised Omega Air dealer for India, Nitrogenium offers the best available pricing with GST-compliant invoicing. For a current price list or a quotation, WhatsApp +91-9810070303 or call +91-8527070303 with your filter model and element grade.

Home Air Filters Nitrogen Generators Liquid Nitrogen Plants Air Dryers Replacement Elements About Us Contact Blog 💬 WhatsApp Us

Omega Air Authorised Dealer — India & SAARC

Omega Air Filter Elements
India — Genuine, In Stock, Delhi

Name: Omega Air Compressed Air Filter Elements — AAF / BF / HF / CHP Series
Brand: Omega Air
Availability: InStock
Rating: 4.9 (38 reviews)

Genuine Omega Air replacement filter elements for AAF, BF, HF and CHP series compressed air filters. Available in all five grades — P, R, M, S and ACS — ISO 8573-1 certified. As the authorised Omega Air dealer for India, we supply from Delhi stock with pan-India delivery in 24–72 hours.

5 Element Grades

6 Filter Series

Authorised Dealer

ISO 8573-1 Certified

💬 WhatsApp Enquiry 📞 +91-9810070303

AAF — 16 bar Screwed BF — 16 bar Flanged HF — 50 bar CHP — 420 bar VAC — Vacuum

Authorised Omega Air Dealer

Nitrogenium is the authorised Omega Air dealer for India and SAARC. All elements supplied are genuine Omega Air product — not copies — with manufacturer traceability and ISO 8573-1 certification.

Filter Series

Element Grades

420

Max bar (CHP)

Quote Turnaround

AAF Series

Screwed BSP connection — 16 bar — 10 to 2,760 Nm³/h

16 bar max BSP ½" – 3" ISO 8573-1

The AAF is Omega Air's most widely installed compressed air filter series — screwed BSP connections from ½" to 3", flows from 10 to 2,760 Nm³/h at 7 bar, max working pressure 16 bar. Used across general manufacturing, automotive, food & beverage, and pharmaceutical applications. Available in all five filtration grades.

Grade	Rating	Filtration	ISO 8573-1	Typical Use
P	3 µm	General particulate removal	Class 3 (solid)	Pre-filter, general use
R	1 µm	Fine particulate removal	Class 2 (solid)	Pre-filter for coalescing stage
M	0.1 µm	Coalescing — oil mist & water aerosols	Class 2 (oil)	General coalescing
S	0.01 µm	High-efficiency coalescing	Class 1 (oil)	Food, pharma, electronics, N₂ gen
ACS	Activated carbon	Oil vapour, hydrocarbons, odours	Class 1 (vapour)	Food contact, breathing air, painting

Flow range: 10–2,760 Nm³/h at 7 bar | Connection: BSP ½" to 3" screwed | Max pressure: 16 bar | Temp: up to 60°C

BF Series

Flanged connection DN80–DN300 — 16 bar — 1,680 to 31,400 Nm³/h

16 bar max DN80–DN300 High Flow

The BF series is Omega Air's high-flow flanged filter — designed for large compressor rooms and central compressed air systems. Flanged connections DN80 to DN300, flow rates up to 31,400 Nm³/h at 7 bar, max 16 bar working pressure. Ideal for steel plants, cement factories, large automotive plants and utility air systems.

Grade	Rating	Filtration	ISO 8573-1
P	3 µm	General particulate	Class 3 (solid)
R	1 µm	Fine particulate	Class 2 (solid)
M	0.1 µm	Coalescing — oil mist	Class 2 (oil)
S	0.01 µm	High-efficiency coalescing	Class 1 (oil)
ACS	Carbon bed	Oil vapour & odour	Class 1 (vapour)

Flow range: 1,680–31,400 Nm³/h at 7 bar | Connection: Flanged DN80, DN100, DN125, DN150, DN200, DN250, DN300 | Max pressure: 16 bar

HF Series

High pressure screwed BSP — 50 bar — 71 to 2,760 Nm³/h

50 bar max BSP ½" – 1½" High Pressure

The HF series handles high-pressure compressed air up to 50 bar — used in PET bottle blowing, tyre industry, high-pressure tool applications and pneumatic testing rigs. Screwed BSP connections, flow rates 71 to 2,760 Nm³/h. Available in M, S and ACS grades for critical downstream filtration.

Grade	Rating	Application
P	3 µm particulate	Pre-filtration for HF systems
M	0.1 µm coalescing	PET blowing, tyre press, HP tools
S	0.01 µm high-efficiency	Critical HP applications — ISO Class 1
ACS	Activated carbon	HP vapour removal

Flow range: 71–2,760 Nm³/h at 7 bar | Connection: Screwed BSP | Max pressure: 50 bar | Typical use: PET blowing, tyre industry, HP testing

CHP Series

Very high pressure screwed BSP — 100 to 420 bar — 40 to 715 Nm³/h

Up to 420 bar Ultra-HP

The CHP series is Omega Air's ultra-high-pressure filter range — up to 420 bar working pressure. Used in CNG (compressed natural gas) filling stations, breathing air panels, hyperbaric applications, hydraulic test rigs and specialty gas systems. Robust steel construction with screwed connections rated to ATEX and pressure vessel standards.

Pressure Range	Flow (Nm³/h)	Grade Available	Typical Use
100 bar	40–715	M, S, ACS	HP compressor downstream
200 bar	40–500	M, S, ACS	CNG, breathing air, diving
420 bar	40–300	M, S, ACS	Ultra-HP specialty, military

⚠️ High-pressure application: CHP filter elements must be selected in consultation with our technical team. Share your system pressure, flow rate and application — WhatsApp us at +91-9810070303.

P-VAC & M-VAC Series

Vacuum filter elements — P-VAC up to 345 Nm³/h | M-VAC (medical) up to 787 Nm³/h

Vacuum Medical Grade

Omega Air's vacuum filter series — P-VAC for general industrial vacuum applications (1.25–345 Nm³/h, BSP + flanged connections) and M-VAC for medical and dental vacuum systems (1.25–787 Nm³/h, compliant with HTM 02-01 and ISO 7396-1). Elements available in M (coalescing) and bacterial filter grades.

Series	Flow Range	Connection	Application	Enquire
P-VAC	1.25–345 Nm³/h	BSP & Flanged	Industrial vacuum, suction cups, clamping
M-VAC	1.25–787 Nm³/h	BSP & Flanged	Hospital, dental, medical vacuum systems

Genuine Omega Air — Authorised Dealer

Need a specific Omega Air element? We stock or source within 24 hours.

Share your filter model (e.g. AAF-030) and required grade. We confirm part number, price and availability immediately.

💬 WhatsApp Now 📞 +91-9810070303 Send Enquiry →

Element Selection Guide

Which Omega Air Element Grade Do You Need?

Omega Air elements are installed in a filtration train — typically 2 to 3 stages depending on the downstream air quality requirement. Each grade removes a progressively finer class of contamination. Selecting the right grade for each position is essential for ISO 8573-1 compliance.

P — 3 µm Particulate

Stage 1 — Bulk solid removal

Removes rust, scale, dust and coarse particles ≥3 µm. Protects downstream coalescing elements from premature blocking. Used as first-stage pre-filter in most compressed air systems.

R — 1 µm Fine Particulate

Stage 1–2 — Fine solid removal

Removes finer particulates ≥1 µm including carbon dust from oil-lubricated compressors. Often installed between P and M grades to extend coalescing element life in high-contamination environments.

M — 0.1 µm Coalescing

Stage 2 — Oil mist removal

Removes liquid oil, oil mist and water aerosols down to 0.1 µm. Residual oil content ≤0.1 mg/m³. ISO 8573-1 Class 2 (oil). The most widely installed element in industrial compressed air systems.

S — 0.01 µm High-Efficiency

Stage 3 — ISO Class 1 oil

Removes ultra-fine oil mist and water aerosols to 0.01 µm. Residual oil <0.01 mg/m³. ISO 8573-1 Class 1 (oil). Required for food, pharma, electronics, nitrogen generators and breathing air applications.

ACS — Activated Carbon

Stage 4 — Vapour & odour removal

Adsorbs oil vapour, hydrocarbons and odours. Residual oil vapour <0.003 mg/m³. ISO 8573-1 Class 1 (vapour). Essential for food contact air, breathing air, paint spraying and any application sensitive to hydrocarbon contamination.

Technical Specifications

Omega Air Filter Series — Technical Comparison

Series	Connection	Max Pressure	Flow Range	Grades	Typical Use
AAF	Screwed BSP ½"–3"	16 bar	10–2,760 Nm³/h	P, R, M, S, ACS	General industrial
BF	Flanged DN80–DN300	16 bar	1,680–31,400 Nm³/h	P, R, M, S, ACS	Large plants, utilities
HF	Screwed BSP	50 bar	71–2,760 Nm³/h	P, M, S, ACS	PET blowing, tyre industry
CHP	Screwed BSP	100–420 bar	40–715 Nm³/h	M, S, ACS	CNG, breathing air, diving
P-VAC	BSP & Flanged	Vacuum	1.25–345 Nm³/h	M	Industrial vacuum systems
M-VAC	BSP & Flanged	Medical vacuum	1.25–787 Nm³/h	Medical grade	Hospital, dental vacuum

Application Sets

Recommended Element Combinations by Application

🏭 General Manufacturing

Pneumatics, tools, actuators, general instrumentation

Element set: P + R + M

🎨 Paint & Coating

Spray painting, powder coating, surface treatment

Element set: P + M + ACS

🍎 Food & Beverage / Pharma

Product contact air, filling, packaging, clean rooms

Element set: P + S + ACS

🔬 Electronics / Semiconductors

PCB assembly, SMD, cleanroom air supply

Element set: R + M + S

⚗️ Nitrogen Generator Feed

PSA nitrogen generator compressed air inlet

Element set: P + M + S

🏥 Medical / Breathing Air

Hospital, dental, breathing air panels

Element set: M + S + ACS (M-VAC for vacuum)

Why Buy Omega Air Elements from Nitrogenium

The Authorised Omega Air Dealer for India & SAARC

🏅

Authorised Dealer — Genuine Product

Not a copy or compatible — every element we supply is genuine Omega Air product with full manufacturer traceability and warranty support.

🏆

ISO 8573-1 Certified

All Omega Air elements are independently tested and certified to ISO 8573-1. You receive test certificates on request.

📦

Delhi NCR Stock — Fast Dispatch

High-turnover AAF and BF series elements stocked in Delhi. Orders placed before 2 PM dispatched same day. Pan-India delivery in 3–5 days.

🔁

Parker Cross-Reference Available

Omega Air ODHE series elements are certified cross-references for Parker Domnick Hunter Oil-X Evolution housings — same performance, direct drop-in fit.

🧾

GST-Compliant Invoicing

Registered supplier — GST invoice with correct HSN codes for all compressed air filter elements. Suitable for maintenance department PO processing.

🔧

Technical Support

Our engineers help you select the correct filter series, element grade and replacement interval. Free pre-purchase consultation.

Frequently Asked Questions

Omega Air Filter Elements — FAQ

What Omega Air filter series do you supply elements for? +

We supply genuine Omega Air filter elements for all major series: AAF (screwed BSP, 16 bar, 10–2,760 Nm³/h), BF (flanged DN80–DN300, 16 bar, up to 31,400 Nm³/h), HF (50 bar high pressure, screwed BSP), CHP (ultra-high pressure up to 420 bar), P-VAC (industrial vacuum) and M-VAC (medical vacuum). If your filter model is not listed, WhatsApp us the model plate details and we will identify the correct replacement element.

Are Omega Air elements interchangeable with Parker Domnick Hunter? +

Yes — Omega Air's ODHE series elements are engineered as direct cross-references for Parker Domnick Hunter Oil-X Evolution filter housings. ODHE elements are dimensionally identical to Parker cartridges and certified to the same ISO 8573-1 class. They fit all existing Parker Oil-X Evolution housings without modification. This is not a generic "compatible" product — it is an Omega Air engineered replacement with its own test certification. Share your Parker part number and we will confirm the ODHE cross-reference immediately.

Which element grade should I use — M or S? +

M grade (0.1 µm, ISO Class 2 oil) is suitable for general industrial use — pneumatics, tools, actuators, spray painting, textile machinery. S grade (0.01 µm, ISO Class 1 oil) is required for food and beverage product contact, pharmaceutical cleanrooms, electronics manufacturing, nitrogen generators and breathing air. If your process requires the air to touch food, medicine or electronics — specify S grade. If in doubt, WhatsApp us with your application and we will recommend the correct grade.

How do I identify my Omega Air filter model? +

The filter series and size are stamped on the filter housing nameplate (e.g. AAF-030 = AAF series, size 030, which flows ~300 Nm³/h at 7 bar). The element grade (P, R, M, S, ACS) is printed on the element label. If the label is worn, look for the colour of the end-cap: typically green/grey = particulate (P/R), grey/white = coalescing (M/S), black = carbon (ACS). Send us a photo on WhatsApp and our engineers will identify the part within the hour.

What is the replacement interval for Omega Air filter elements? +

Omega Air recommends replacing coalescing and particulate elements (P, R, M, S grades) every 12 months or 4,000 operating hours, whichever comes first. ACS activated carbon elements should be replaced every 6 months as the carbon bed saturates regardless of pressure drop. In Indian conditions (high ambient dust, high humidity), we recommend checking elements at 8–9 months. A rising differential pressure gauge or red indicator is a reliable sign the element needs immediate replacement.

Do you supply Omega Air elements for BF flanged filters in India? +

Yes — BF flanged filter elements (DN80 to DN300) are available through Nitrogenium for all grades (P, R, M, S, ACS). BF series elements are used in large compressor rooms and utility air systems in steel plants, cement factories, large automotive plants and power utilities. Lead time is typically 5–10 business days for large BF elements depending on DN size. Contact us with your BF filter DN size, grade, and required quantity for a quotation.